Your home or cabin must need a new roof or you probably wouldn’t be reading this just for the fun of it. Your next question is: Can I install my own metal roof? You can install your own metal roof, you just have to be sure that you are capable of doing it.
Choosing the right material should be the first thing that you would do if you want to install metal roofs. These materials which is appropriate to your existing roof’s pitch, framing and metal roof panels include; hardware, decking and flash. In order for you to easily purchase the right hardware, it is advisable to bring with you a detailed drawing thus, you will already know how many roofing panels should you have.
If your metal roofing installation is being done over the existing roofing materials you may need to install furring strips or asphalt paper between the two roofs. Assembling the correct tools beforehand will help you secure that all the tool from http://www.calroofingco.com/ that you have will do the job properly and safely. Reading and following the manufacturer’s instructions plays a vital role before you do the actual job.
Knowing the pitch of your existing roof decking will give you a knowledge whether your roof has a good drainage or not. You really have to check your existing roof decking since every metal roof has different variations and designs, hence, their roof pitch requirements are also different from each other. Once you have the pitch of your roof then you can select from the various designs for that particular pitch. If the pitch of the roof is low, you may have to have additional sealant and hardware to make sure that you have a roof that is watertight. You can either use an internal or external fastener for your metal roofing installation, however, exterior fastener is more recommended. The type of flashing, trims and fasteners that will going to be used depends on the kind of roofing panel that you will choose.
Eye protection, fastening tools at http://www.calroofingco.com/#!about-us, small hand-held metal snips for cutting around obstructions, carbide blade good for metal cutting, power saw, nibbler attachment for your cordless drill to cut across panels, dedicated impact driver for large roofing job, a cordless drill that has fastener attachment for small roofing job and gloves with a good grip are the materials that you will need if you want to install metal roofing.